Use a funnel, if necessary, to prevent oil from spilling onto the top of the engine. from under the vehicle, being careful not to spill the oil in the drain pan, then lower the vehicle.Īdd new oil to the engine through the oil filler cap in the valve cover. Place the filter assembly into the filter housing and carefully thread the cap into the housing.
#Polaris digital wrench 3.8 install#
Install a new O-ring onto the cap and apply a light amount of engine oil to the O-ring. Always use jackstands to support the vehicle when it becomes necessary to place your body underneath the vehicle.
The jack provided with your vehicle is designed solely for raising the vehicle to remove and replace the wheels. Warning: Never get beneath the vehicle when it is supported only by a jack. Raise the vehicle with a floor jack and support it securely on jack stands. On other engines it will help the oil drain faster) (On the 3.6 liter engine, the filler cap must be removed to drain all the oil. Open the hood and remove the filler cap from the valve cover. When the engine is warm, park the vehicle on a level spot and turn off the engine. Warm oil and sludge will flow out more easily.
Start the engine and allow it to reach its normal operating temperature. The engine and exhaust components will be warm during the actual work, so try to anticipate any potential problems that will cause. If this is your first oil change, look under the vehicle and familiarize yourself with the locations of the oil drain plug and the oil filter. You should also have plenty of rags or newspapers handy for mopping up any spills.Īccess to the underside of the vehicle is greatly improved if the vehicle can be driven onto ramps, or jacked up and supported by jack stands. Make sure you have all the necessary tools before you begin this procedure. Frequent oil changes are the best preventive maintenance the home mechanic can give the engine, because aging oil becomes diluted and contaminated, which leads to premature engine wear.